Pro Mais Sintonizador Automático 100w 1.855mhz 0.96-polegada Oled Bateria de Exibição para Dentro para a Estação de Rádio de Ondas Curtas 2023 Atu100
R$ 138,12
DÚVIDAS?
Envie um email para:
Controle Remoto Inteligente
Vídeo de Demonstração do Produto
Opção de Compra e tempo de entrega
Ficha técnica do produto
| Características | Especificações |
|---|---|
| Método de Comunicação | Outro |
| Estado de Montagem | Pronto Para Brincar |
| Giroscópio | None |
| Escala | 1 |
| Número do Modelo | Atu-100 |
| Velocidade Máx. | None |
| Canais de Controle | 2 Canais |
| Nome da Marca | TZT |
| Origem | CN (origem) |
| Used FOR | 10W To100w Shortwave Radio Station |
| NOT Suit FOR | (0-10w)qrp Radio |
| Name | Antenna Tune |
| Built-in Battery | 2000mah |
| S | 67655 69086 67980 |
New ATU100 Automatic Antenna Tuner 100W 1.8-55MHz with 0.96-Inch OLED Display Battery inside For 10-100W Shortwave Radio Station
ONTE:
In order to meet the different needs of customers, different options are set at the same link: Kit (assembled and unassembled) and finished machines for you to choose. In order to avoid purchasing errors, please confirm the options you need to purchase. Thank you for your cooperation
Other detailed technical parameters and schematic diagrams, documents, pcb source files and firmware can be downloaded from the
following site:
You can contact customer service if you have any questions
Features:
– Model: ATU-Pro+
– 0.96& OLED display
– Frequency 1.8-50 MHz
– Power supply voltage range: 10-15V DC
– Maximum current consumption: 300 mA
– Maximum working power: 120W
– Maximum possible measured power: 150W
– 1W: It is necessary to start setting the minimum power
– Minimum possible measured power: 0.1W
– Step for measurement on powers under 10W: 0.1W
– Step for measurement on powers above 10W: 1W
– Power measurement accuracy: 10%
– Specified maximum inductor: 8.4 uH capacity
– The minimum installation step of inductor: 0.05µH
– Maximum installation capacity: 1870 pF capacitor
– Minimum installation step: 10 pF
Software Optimization:
1. Synchronize the latest version 3.1 firmware
2. New configuration interface, eliminating the need for repeated flashing, no need to buy a burner
3. Optimize power measurement calibration algorithm, power measurement is more accurate
4. Configuration interface description
– How to enter: Press and hold TUNE button and turn on the tail power switch at the same time. After OPTIONS is displayed on the screen, release the TUNE button to enter the setting interface.
– Operation mode: Short press TUNE button to change the current value. Long press the TUNE button to switch setting items.
– Description of each option:
• Auto Mode (ON/OFF): Freely control the automatic mode of antenna tuner, and omit the automatic button, making it more convenient to use. If you plan to use the device without additional buttons, you can enable the automatic mode by setting the value to ON. The default value is ON.
• Show Loss (ON/OFF): Freely control the loss calculation display interface, the display is more intuitive. Indicating the power delivered to the antenna and efficiency of fider and transmitter when input power is enough for correct SWR measuring.
• Fider Loss (0.0-9.9): Freely define the loss value of wire, which can calculate antenna efficiency more accurately. This value uses for counting the power delivered to antenna. The loss value can be found in the reference data for the used cable or you can measure the exact value yourself.
• Auto Delta (1.3-3.0): Customize the start value of SWR in automatic mode, autonomously control SWR adjustment range, and have a larger application range. The default value is 1.3. That is, when the automatic mode is activated, the tuning process will be triggered when the SWR is above 1.3 and when it changes to (1.3-1).
• Display On (00s-95s): Customize the time when the screen is automatically turned off, which saves power when you are in standby
Set the time of glow display, in seconds. The backlight is glowing while press any buttons and if RF power comes to input. By default it is disabled, value 00.
Package Included:
-1 x Automatic Antenna Tuner
-1 x USB Cable
– 1 x User Manual
Note:
– The product is assembled and with shell.
– Due to its design, stable standing wave value cannot be measured when the power is lower than 10W, so the adjustment work cannot be guaranteed. QRP radio users please not purchase the product.
ATU-100 Automatic Antenna Tuner Kit 1.8-50MHz 100W w/ 0.96-Inch OLED Display Unassembled
1. 2023 Atu-100 Pro + Sintonizador Automático 100w – Número do Modelo : Fashion Shoes With Bag
2. Dentro para a Estação de Rádio de Ondas Curtas – Estilo : Classics
ATU-100 Automatic Antenna Tuner Board Assembled 1.8-50MHz 100W 0.96& OLED Upgraded Hardware 3.2
3. 2023 Atu-100 Pro + Sintonizador Automático 100w – Artesanal : Sim
4. Dentro para a Estação de Rádio de Ondas Curtas – com Plataformas : Não
5. 2023 Atu-100 Pro + Sintonizador Automático 100w – Material do Forro : Plutônio
6. Dentro para a Estação de Rádio de Ondas Curtas – Ajuste : se Ajusta ao Tamanho Use Sei Tamanho Normal
7. 2023 Atu-100 Pro + Sintonizador Automático 100w – Elemento de Moda : Costura
8. Dentro para a Estação de Rádio de Ondas Curtas – tipo de Modelo : Sólida
Description:
This assembled antenna tuner ATU-100 is an automatic tuning antenna. When installing and using it, please try to use a short coaxial cable to connect the short wave machine to the in end of the antenna; use the out port to connect your antenna. When the ATU-100 detects that the tuned transmit power is reached and the standing wave value is greater than 1.3, the tuning can be started, and after the tuning is completed (within the ability of ATU-100, if your antenna is not well matched, it will not be able to be reduced below 1.3, please adjust the antenna), you can perform high-power communication test. The finished board comes with a 128*64 OLED display screen, which takes into account power saving and display font coordination; please pay attention to the consistency of the data cable (dat clk) when installing the screen.
Technical Parameter:
-Allowable supply voltage range: 10-15V DC
-Maximum current consumption: 400mA
-Maximum working power: 100W
-Maximum measurable power: 150W
-Start to input tuning power: 5W (10W or more is recommended, and the maximum should not exceed 30W)
-Minimum measurable power: 0.1W
-Power measurement accuracy: 10%
-Minimum load inductance value 0.05µh
-Maximum load inductance value: 8.53µh
-Minimum load capacitance: 10pf
-Maximum load capacitance value: 1869pf
Other detailed technical parameters and schematic diagrams, documents, pcb source files and firmware can be downloaded from the
following site:
Package List:
1 x Set of Automatic Antenna Tuner
Note:
-The product is assembled.
-This finished board is a network open source project, we provide a test and modification platform for ham without DIY conditions (or you are unwilling to solder by yourself).
-The firmware version has been upgraded to 3.2.
9. 2023 Atu-100 Pro + Sintonizador Automático 100w – Pacote : White Non-woven Bolsa For One Pair
Avaliações de Usuários
Seja o primeiro a avaliar “Pro Mais Sintonizador Automático 100w 1.855mhz 0.96-polegada Oled Bateria de Exibição para Dentro para a Estação de Rádio de Ondas Curtas 2023 Atu100”
Produtos relacionados
R$ 138,12
Não existe nenhuma avaliação ainda.